Hioki | U8793 Arbitrary Waveform Generator Unit For Memory Recorders

Description

ARBITRARY WAVEFORM GENERATOR UNIT
U8793

Pair With Memory Recorders To Achieve A Single-Device Solution For Waveform Recording And Generation

The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder to create a function generator, arbitrary waveform generator, and waveform measurement in a single device.   Easily observe waveforms while varying test conditions, such as changing the signal’s amplitude and frequency as well as programming various waveforms to output in order.

Key Features

• Output arbitrary waveform signals up to 2 channels

• Output problematic waveforms recorded with the Memory Hicorder up to 15 V

• Output customized arbitrary waveforms signals up to 15 V

• For use with Hioki Memory Hicorder series (cannot use with 8847 or MR8847)

• Built-in function generator and sweep function

• Isolated between unit and output, and between all channels

 

Basic Specifications

Output terminal Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less)
Max. rated voltage to ground: 33 V rms AC or 70 V DC
Output voltage range -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV)
Max. output current 10 mA (Allowable load resistance: 1.5 kΩ or more)
Function generator DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz
Arbitrary waveform generator mode Waveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms
D/A refresh rate: 2 MHz (using 16-bit D/A)
Sweep function Frequency, Amplitude, Offset, Duty (Pulse only)
Program function Max. 128 steps (Number of loops for each step, Number of total loops)
Other Self-test function (Voltage), External input/output control
Dimensions and mass 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz)
Accessories None